| Connection Type: | Snap-on Connection |
|---|---|
| Finish: | Galvanized |
| Material: | Steel |
|
Still deciding? Get samples of US$ 2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Double Coupler/Double Clamp/Right Angle Couplers
This type of coupler is used to secure a part or a component of a scaffolding system in place. These right angle couplers can ensure that there'll be no swaying, dwanging, or swiveling that will happen to the area that'll be coupled.
2.Putlog Couplers/Single Coupler
It's a type of a bearing fitting that's non-load, connecting two (2) scaffolding tubes and pipes at a 90-degree angle to each other. The rule in using putlog couplers is that they should only be used in the horizontal position, connecting ledgers to transoms and vice versa.
3.Swivel Couplers
Swivel couplers are components that you use to connect two scaffolding poles at any angle, including a diagonal position. Swivel couplers are deemed to be the most flexible type of coupler that you can purchase!
4.Sleeve Couplers
Scaffolding Sleeve Couplers are used to connect two scaffold tubes, end to end. This can be when using scaffold tube horizontally (such as ledgers), vertically (as standards) or diagonally (diagonal braces).
5.Girder Couplers/Beam Clamp
Girder Couplers is to connect scaffold tube to all types of structural sections, up to a maximum flange thickness of 45mm. It's particularly useful for fastening to RSJs / Girders.
6.Joint Pin Couplers
7.Board Retaining Couplers
Scaffolding Board Retaining Coupler is used to fix scaffolding boards with the tubes below, so that the boards can not be blown away by the winds to make sure the boards are safe enough
){kind=link}